Chapter 2 - Installation
2.5.3 Configuring Advanced TCP/IP Properties
Windows ME
If you want to route traffic through an IP sharing device for your Access
Point, you have to set the default gateway address.
1. On the Gateway page, enter the address
and click Add.
2.5.4 Verifying TCP/IP Settings
Windows ME: Run "winipcfg" from the Start
menu to verify TCP/IP settings.
16
2. On the DNS Configuration page, enter the
required information, click Add, and OK.
3. If Windows asks to restart your computer
now, press Yes.
Windows XP: Use "ipconfig" from the
command prompt to verify settings.
ASUS USB SpaceLink Client