Remove Fan And Cover - U-Line Combo CO1224F User Manual & Service Manual

USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

Remove Fan and Cover

PARTS REPLACEMENT
Note: These models do not require removal of the ice
maker or freezer housing to access the fan motor, drain or
evaporator.
REPLACING EVAPORATOR FAN MOTOR
1. Disconnect unit from power source.
2. Remove two screws from fan cover.
3. Remove two screws holding fan bracket to liner.
Fan Cover
Screws
Evaporator Cover
Screws
Fan Fastners
Air Flow
Fan Fastners
4. Unplug fan connection.
5. Remove two nuts holding the fan to the fan bracket.
6. Replace with new fan making sure air flows in at top
and out at bottom.
7. Plug in the fan connection.
8. Reinstall fan bracket to liner, making sure the fan wires
are tucked behind the fan bracket.
9. Reinstall unit and test.
u-line.com
Remove Fan and Cover 1