Specifications; General Power Tool Safety Warnings - Makita GN420C Instruction Manual

ENGLISH (Original instructions)
1. Safety glasses
2. Face shield
3. Fuel cover
4. Trigger
5. Magazine
6. Pusher lever
7. Pusher button
8. Contact element
9. Exhaust vent

SPECIFICATIONS

Model
Nail capacity
Dimensions (L X W X H)
Net weight
Nail length X Shank diameter
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
... Read instruction manual.
............. Container under pressure, keep away
from temperatures over 50°C (for ex. sun
radiation). Keep container in a well
ventilated place.
............. Use only outside or well ventilated
rooms. Do not breathe gas.
............. Do not use near flames or sprays on
heated surfaces. In use, may form
flammable/explosive vapour-air mixture.
............. Do not damage, puncture or burn even
after use.
..... Wear safety glasses.
............. Keep fingers away from trigger when not
driving fasteners to avoid accidental
firing.
............. Use only in ventilated area to avoid
nausea and unconsciousness. Never use
tool in combustible atmospheres. The
tool exhaust may ignite flammable
materials.
............. Do not use on scaffoldings, ladders.
Explanation of general view
10. Lamp
11. Indicating lamp
12. Battery cartridge
13. Button
14. Lamp button
15. Metering valve
16. Cap
17. Jet nozzle
18. Adjuster
20 nails (2 strips)
315 mm X 108 mm X 390 mm
3.6 kg
Nail L: 15 mm - 40 mm, d: 2.6 mm - 3.1 mm
END107-7
Intended use
The tool is intended for securing a thin steel plate to the
concrete.
General Power Tool Safety
Warnings
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
19. Hook
20. Nail stopper
21. Bolt
22. Thin steel plate
23. Penetration amount into concrete
24. Under driver guide
25. Filter cover
26. Filter
GN420C
430 mm X 108 mm X 390 mm
D.C. 7.2 V
............. Warning: hot surface!
Do not touch around this symbol.
Touching the surface may cause burns or
injuries.
Cd
.......... Only for EU countries
Ni-MH
Li-ion
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation in
accordance with national laws, electric
equipment and batteries and battery
pack(s) that have reached the end of
their life must be collected separately and
returned to an environmentally
compatible recycling facility.
WARNING Read all safety warnings and all
40 nails (4 strips)
3.8 kg
ENE072-1
GEA010-1
7