Application Examples - Ubiquiti PowerBeam PBE-5AC-620 Quick Start Manual

LEDs
Signal
shown below:
Ethernet
when an active Ethernet connection is made and
flash when there is activity.
Power
device is connected to a power source.

Application Examples

The PowerBeam mounted
outdoors with the Dish
Reflector installed provides
directional outdoor coverage.
(The gain depends on the
reflector.)
The default values (from left to right) are
LED will light blue when the wireless signal
strength is equal to or above -65 dBm.
LED will light blue when the wireless signal
strength is equal to or above -73 dBm.
LED will light blue when the wireless signal
strength is equal to or above -80 dBm.
LED will light blue when the wireless signal
strength is equal to or above -94 dBm.
The Ethernet LED will light steady blue
The Power LED will light blue when the
The PowerBeam mounted
outdoors without the Dish
Reflector installed provides
outdoor-to-indoor coverage
using the 3 dBi Antenna
Feed only.