You see a screen like this:
3. Select Router > Start Setup or Change Settings> Push Button Setup (WPS).
4. Follow the instructions on the LCD screen to complete WPS setup.
5. Press the
You see the
your computer or device, and then print. If you are printing from a computer, make sure you installed
the network software from the Epson website.
Note: If you don't see the
Parent topic:
Printing a Network Status Sheet
You can print a network status sheet to help you determine the causes of any problems you may have
using your product on a network.
Before you begin, make sure paper is loaded in the product.
1. Press the
2. Select Settings > General Settings > Network Settings > Network Status.
home button to exit.
icon on the LCD screen and should be able to connect to your product directly from
icon, repeat these steps to try again.
Wi-Fi Protected Setup (WPS)
home button, if necessary.
29