Table of Contents
Advertisement
4. To move the paper into cutting position, press and hold
you want to cut appears at the dotted line as shown.
Note: You cannot set a cut position further inside than the bottom margin. When the length of paper
beyond the cutting position is shorter than the minimum length, the paper will be fed automatically
until the minimum length is reached.
• Plain paper or tracing paper: 3.9 inches (100 mm)
• Photo paper or coated paper: 3.1 inches (80 mm)
• Synthetic or other thick paper: 2.4 inches (60 mm)
5. To cut the paper, select
• If the Auto Cut setting is turned off only in the printer driver, the paper is cut and the paper leading
edge returns to the print wait position.
• If the Auto Cut setting is turned off in the control panel, select Cut to manually cut the paper using
the built-in cutter or select Print Cutting Guideline to print a line on the paper to guide with
manual cutting. Select Done when you are finished to rewind the paper.
Parent topic:
Cutting Roll Paper
Cut.
49
Forward or
Backward until the position
Advertisement
Table of Contents
