Cat5 8000 series matrix kvm usb extender/switcher (16 pages)
Summary of Contents for Gefen CAT5-9000
Page 1
CAT5•9000 U S E R M A N U A L www.gefen.com...
Page 2
Chatsworth, CA 91311 www.gefen.com support@gefen.com Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. CAT5•9000 is a trademark of Gefen Inc. Macintosh is a trademark of Apple Computer Inc.
INTRODUCTION OPERATION NOTES CAT5•9000S FRONT PANEL DESCRIPTIONS CAT5•9000S BACK PANEL LAYOUT CAT5•9000S BACK PANEL DESCRIPTIONS CAT5•9000R FRONT PANEL DESCRIPTION CAT5•9000R BACK PANEL LAYOUT CAT5•9000R BACK PANEL DESCRIPTIONS CAT5 WIRING DIAGRAM WIRING DIAGRAM HOW TO ADJUST THE PICTURE SPECIFICATIONS WARRANTY TABLE OF CONTENTS...
INTRODUCTION Thank you for purchasing the new ex•tend•it CAT5•9000 series by Gefen, Inc. The ex•tend•it CAT5•9000 by Gefen allows users the benefi ts of extending VGA, PS/2, RS232, and audio signals beyond the desktop. In a growing number of applications, broadcast stations and production facilities there is a need to locate a computer remotely from the keyboard, mouse, and video monitor.
OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE CAT5•9000 SYSTEM • Use industry standard Category-5 (CAT-5) cable to operate the CAT5•9000 system. CAT-5 E cable is preferred. • When monitors are used in the local and remote locations, the video monitors must be able to use the same resolution.
CAT5•9000S BACK PANEL DESCRIPTIONS POWER - 5 VDC external power supply MONITOR 1 - HD15 output connects to local monitor 1 VIDEO IN 1 - HD15 input from computer AUDIO IN 1 - Audio Mini Jack input from computer CAT-5 USB/VID/AUD - RJ-45 input extends video, and audio 1 with CAT-5 cable USB IN - NOT USED KEYBOARD - Mini din PS/2 connector connects to PC for keyboard controls MOUSE - Mini din PS/2 connector connects to PC for mouse controls...
CAT5•9000R FRONT PANEL DESCRIPTIONS Front Panel Function Description BRIGHTNESS - Adjusts the brightness for the monitor POWER ON INDICATOR - Indicates that the unit is plugged in and powered on...
CAT5•9000R BACK PANEL DESCRIPTIONS POWER - 5 VDC external power supply VIDEO OUT 1 - HD15 output connecting to the video monitor 1 VIDEO OUT 2 - HD15 output connecting to the video monitor 2 AUDIO OUT 1 - Audio mini jack connects to speakers USB OUT - NOT USED CAT-5 VID1/USB - RJ-45 input connects CAT-5 cable to receive extended video, and audio 1 signals...
CAT5 CABLE LENGTH SETUP Jumper settings are used to set the focus of the picture and characters to the best possible sharpness. The jump ers in the CAT5•9000R are set at the factory as shown in the diagram below. The fi rst step to adjusting the video is to have the CAT5•9000S and CAT5•9000R con nect ed together with the CAT-5 cable that is going to be used in the in stal la tion.
SPECIFICATIONS Video Amplifi er Bandwidth ... 350 MHz Actual Bandwidth ... 120 MHz Input Video Signal ... 1.2 Volts p-p Video In ... HD-15 Focus/Brightness Control ... 25 to 450 FT Video out ... HD-15 Link Connector ... RJ-45 PS/2 Keyboard Connectors ... 8 Pin MiniDin PS/2 Mouse Connectors ...
Gefen Inc. warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen Inc. is notifi ed within two (2) year from the date of shipment, Gefen Inc. will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifi...
Need help?
Do you have a question about the CAT5-9000 and is the answer not in the manual?
Questions and answers