Jbat1: Clear Cmos (Reset Bios) Jumper; Bios_Sw1: Multi-Bios Switch - MSI MEG Z690 GODLIKE User Manual

JBAT1: Clear CMOS (Reset BIOS) Jumper

There is CMOS memory onboard that is externally powered from a battery located on
the motherboard to save system configuration data. If you want to clear the system
configuration, set the jumpers to clear the CMOS memory.
Resetting BIOS to default values
1. Power off the computer and unplug the power cord.
2. Use a jumper cap to short JBAT1 for about 5-10 seconds.
3. Remove the jumper cap from JBAT1.
4. Plug the power cord and Power on the computer.

BIOS_SW1: Multi-BIOS Switch

This motherboard has two built-in BIOS ROMs. If one is crashed, you can shift to the
other for booting by sliding the switch. And the multi BIOS LED indicates which BIOS
ROM is in operation.
BIOS_SW1
Multi-BIOS LED
⚠
Important
Do not use the Multi-BIOS switch when system is booting up.
Keep Data
(default)
BIOS B BIOS A
(Default)
BIOS_SW1
Clear CMOS/
Reset BIOS
Multi-BIOS LED
White : BIOS A
Red : BIOS B
Overview of Components
43