Operation
Playing a disc
Remove the cover before operating the G 2000 R.
A brief press on the button switches the machine on.
Place the disc on the platter.
We recommend that you always remove superficial dust from the disc before
you play it, e.g. using a carbon fibre brush or an anti-static cloth.
Press the / button (as required by the disc on the platter) in
order to start the motor.
Move the tone arm inward until it is above the desired groove. The selected
disc speed button glows white when the nominal speed is reached, indicating
that you can slowly lower the tone arm onto the disc by operating the tone
arm lift lever (see illustration below).
29