Table 2: Detector Configuration Options - GasTech F-Guard-IR3-H2 User Manual

Function
Sensitivity
Ultra-fast detection
Alarm Delay
Alarm Latch
Enable Pre-Alarm 0-20mA
Enable dirty window warning 0-
20mA
Aux. Relay
Window Heater
Modbus address
Manual BIT – Alarm Output Test
Note: Medium, Default, sensitivity setting allows detection of a 32-in Plume hydrogen
•
flame at a distance of 66ft (20m).
For more information & technical support:
F-Guard IR3-H2 User Manual
T 2: D C
ABLE ETECTOR ONFIGURATION
Very low, Low, Medium, High, Extreme
Disabled, Enabled
0, 5, 10, 20 or 30 seconds
Disabled, Enabled
Disabled, Enabled
Disabled, Enabled
Alarm, Pre-Alarm, Dirty Window
Warning
Disabled, Enabled
1 – 247
Disabled, Enabled
info@gastech.com
O
PTIONS
Options
Medium
Disabled
0 seconds (no delay)
Disabled
Disabled
Disabled
Alarm
Enabled
1
Disabled
76-M-6010-02-02
Default Setting
22