the detector from above. Contact Gastech for more details on mounts suitable for retro
fit of existing installations.
To install the tilt mount:
a) Mount the tilt mount base ( Figure 11: Tilt Mount Base - Front View ) to a solid structure using
four suitable fixings through the four 7mm (0.28") diameter holes. Four captive screws with
spring washers are provided in the tilt mount.
For more information & technical support:
F-Guard IR3-H2 User Manual
Figure 11: Tilt Mount Base - Front View
Figure 12: Tilt mount base – Side View
info@gastech.com
76-M-6010-02-02
13