Adjust Volume Level And Sound Effect; Apply Auto Dj Effect; Apply Dj Effects Manually; Apply Nx Bass - Philips NTRX710 User Manual

9 Adjust volume
level and sound
effect

Apply AUTO DJ effect

The AUTO DJ function adds various sound and
playback effects to your music automatically:
Effects Description
Auto Add different sound effects to the
effect music automatically.
Cross Fade one piece of music out while
fade fading another piece of music in at
the same time.
Back spin Rewind the music to a previous
point.
Loop Repeat playing a section of the
music.
Beat box Add beat box effects to the music.
Voice Add a sound during playback.
sampling
• To apply AUTO DJ effects, press AUTO DJ
repeatedly to select from:
• [METAL] (Metal)
• [PARTY] (party)
• To turn off the AUTO DJ effects, press
AUTO DJ repeatedly to select [AUTO DJ
OFF] (AUTO DJ off).
• To adjust the occurrence frequency and
sound level of the added effects, rotate the
DJ EFFECT dial.
Note
•
Such effects are added by the application automatically
and randomly.
•
The function is only available in USB A mode.

Apply DJ effects manually

You can also add preset DJ effects by yourself.
Press DJ EFFECT repeatedly to select from
•
the following effects:
• [SCRATCH] (scratch)
• [REVERB] (reverb)
• [BEAT BOX] (beat box)
• [YEAH] (yeah)
• To turn off the DJ effects, press DJ EFFECT
repeatedly to select [OFF] (off).
• To adjust the sound level of the added
effects, rotate the DJ EFFECT dial.
Note
•
The function is not available in USB B and Audio in B
modes.

Apply NX Bass

NX Bass effect adds clean and lively
characteristics to your music with very low
background noise.
1
Open the cover on the NX Bass button.
2
Press the NX Bass button. The sound will
change in 3 stages:
• Stage 1: The sound volume increases
to a higher level and stays at this level
for 5 seconds. The display panel shows
[FIRING] (firing);
• Stage 2: The sound volume gradually
decreases to its original level in 10
seconds. The display panel shows
[DISCHARGING] (discharging);
• Stage 3: The sound volume keeps
at normal level for 40 seconds. The
display panel shows [RECHARGING]
(recharging).
EN 17