Table of Contents
Advertisement
[MULTI DISPLAY] menu
On the menu screen, select [MULTI DISPLAY] from the main menu, and select an item from the sub-menu.
Refer to "Navigating through the menu" (x page 87) for the operation of the menu screen.
Using the multi-display function
Four images can be displayed simultaneously by dividing the projection screen into four.
1)
Press as to select [MULTI DISPLAY MODE].
2)
Press the <ENTER> button.
f The [MULTI DISPLAY MODE] screen is displayed.
3)
Press as to select a function.
[OFF]
[USER1]
[USER2]
[USER3]
4)
Press the <ENTER> button.
Setting the multi-display function
The setting of the multi-display function can be saved to [USER1], [USER2], or [USER3].
1)
Press as to select [MULTI DISPLAY MODE].
2)
Press the <ENTER> button.
f The [MULTI DISPLAY MODE] screen is displayed.
3)
Press as to select the desired mode from [USER1], [USER2], and [USER3], and press the <ENTER>
button.
4)
Press as to select [UPPER LEFT WINDOW], [UPPER RIGHT WINDOW], [LOWER LEFT WINDOW], or
[LOWER RIGHT WINDOW], and press the <ENTER> button.
f The [UPPER LEFT WINDOW] screen, the [UPPER RIGHT WINDOW] screen, the [LOWER LEFT
WINDOW] screen, or the [LOWER RIGHT WINDOW] screen is displayed.
5)
Press as to select the input terminal to be displayed in the window, and press the <ENTER> button.
f The input terminal that can be selected varies depending on the structure of the optional Interface Board
installed in the slot.
6)
Press as to select [FRAME LOCK].
7)
Press qw to switch the item.
f The items will switch each time you press the button.
[UPPER LEFT WINDOW]
[UPPER RIGHT WINDOW]
[LOWER LEFT WINDOW]
[LOWER RIGHT WINDOW]
Note
f The image currently displayed in the four dividing screen is not projected correctly when the following video signal is input.
g Video signal with resolution exceeding 1 920 x 1 200 dots
g Video signal with dot clock frequency exceeding 162 MHz
g 6G-SDI signal, 12G-SDI signal
f The appearance may vary for each when an image from one input terminal is displayed on multiple screens.
f The image adjustment values such as the [PICTURE] menu → [PICTURE MODE], [GAMMA], or [COLOR TEMPERATURE] that are set to
the upper left screen are applied to all screens.
f The movement of the displayed image becomes discontinuous when [FRAME LOCK] is set for the still image signal.
f The movement of the displayed image may become discontinuous for the images where [FRAME LOCK] is not set.
f [MULTI DISPLAY MODE] is fixed to [OFF] and the four-screen display is not possible in the following cases.
g When the [DISPLAY OPTION] menu → [BACKUP INPUT SETTING] → [BACKUP INPUT MODE] is set to anything other than [OFF]
Chapter 4 Settings — [MULTI DISPLAY] menu
Does not use the multi-display function.
Displays four-screen display with the setting in "Setting the multi-display function" (x page 179).
Sets the frame lock for the input signal set to the upper left window.
Sets the frame lock for the input signal set to the upper right window.
Sets the frame lock for the input signal set to the lower left window.
Sets the frame lock for the input signal set to the lower right window.
ENGLISH - 179
Advertisement
Table of Contents
