Char-Broil 463440109 Product Manual page 23

Place heat tents over burners by inserting tabs into slots in front of firebox.
11
Opposite ends of heat tents rest on pins in back of firebox.
Place cooking grates onto grate rests.
12
Insert ends of Swing Away pivot wire into holes in sides of grill lid. Insert ends of Swing Away leg wire into holes in sides of firebox.
NOTE: Pivot and leg wires, running side-to-side, should be under wires running front-to-back. If pivot and leg wires are on top,
Swing Away is installed upside-down.
Unscrew ignitor cap and place AAA battery into ignitor slot with positive end (+) facing outward. Screw ignitor cap onto ignitor.
+
-
Swing Away
Leg Wire
Cooking Grate
AAA Battery
Pin
23