Delete Images; Delete An Image; Delete Multiple Images; Delete All Images - Fluke PTI120-9 Abridged User Manual

3. Repeat for each additional image.
4. Tap Add Note.
A keyboard opens on the display.
5. Use the keyboard to enter a message.
6. Tap Save.

Delete Images

To delete images, do the corresponding procedure below for the desired action.

Delete an Image

To delete only one image:
1. Open an image in fullscreen mode.

2. Tap . If needed, tap
3. Tap Delete.

Delete Multiple Images

To delete multiple images at the same time:

1. Select
The display returns to the memory gallery.
2. Tap an image to select it. Tap an image again to clear the selection.
The border and filename text color change to yellow.
3. Repeat for each additional image.
4. Tap Delete Images.
5. Tap Delete.

Delete All Images

To delete all of the images at the same time:

1. Select
2. Tap Delete.

Asset ID

Use the memory gallery toolbar to add or remove an asset ID from an image that is saved in memory. See
Identification (Asset
To add an asset ID to an image:
1. Open an image in fullscreen mode.

2. Tap .
3. Assign an asset ID. See
Find Quality Products Online at:
first.
> > Delete Multiple Images.
> > Delete All Images.
ID).
Asset Identification (Asset
GlobalTestSupply
www.
Memory Menu (Memory Gallery)
ID).
.com
Pocket Thermal Imager
Asset
13
sales@GlobalTestSupply.com