Before you use the Product for the first time, charge the battery for at least 1.5 hours. The battery status shows
on the five-segment charge indicator.
1. Connect one end of the USB cord into the USB port on the Product and the other end into a USB port on a
PC.
2. Charge until the charge indicator,
3. Disconnect the USB cable when the battery is fully charged.
To prevent damage to the Product:
•
Always operate in the specified temperature range.
•
Do not attempt to charge the batteries in extreme cold environments.
Do not incinerate the Product.
Find Quality Products Online at:
, on the display does not flash.
W Caution
~
W Caution
GlobalTestSupply
www.
Pocket Thermal Imager
Radio Frequency Data
.com
sales@GlobalTestSupply.com
17