ViewSonic PA502S User Manual page 49

Function
Advanced
Reset color settings
Auto Power On
Smart Energy
Smart Restart
Quick Power Off
Color
See "Adjusting Color"
Tint
See "Adjusting Tint" for details.
Sharpness
See "Adjusting Sharpness"
Gamma
See "Selecting a Color Temperature"
Brilliant Color
See "Adjusting Brilliant Color"
Noise Reduction
See "Reducing image noise"
Color Management
See "Color Management"
Returns all color settings to the factory preset values.
Direct power on
Selecting On allows the projector to turn on
automatically once the power is fed through the power
cord.
Auto Power Off
See "Setting Auto Power Off"
Sleep Timer
See "Setting the Sleep Timer"
Power Saving
See "Set power saving"
This feature requires some start-up time. Make sure
the projector is on for more than 4 minutes and select
Enable to re-start the projector immediately within 120
seconds after the projector is turned off. The projector
will directly enter Standby Mode if it is not re-activated
after 120 seconds.
On: The quick start function reduces the cooling
process time when the projector is turned off.
Off: Shut down and perform the cooling process.
If you select Invalid, the Smart Re-start feature will
automatically turn off.
42
Description
for details.
for details.
for details.
for details.
for details.
for details.
for details.
for details.
for details.