Listening To Messages - Panasonic KX-TG572SK Operating Instructions Manual

Answering System
Handset / Base unit
1
MMENUN#304
2
MYESN
3
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Playing back the greeting message
Handset / Base unit
1
MMENUN#303
2
Proceed with the operation for your unit.
Handset: To exit, press MOFFN.
Base unit: To exit, press MEXITN.

Listening to messages

Important:
R If your phone service provider offers voicemail
service, the voicemail service may answer calls
before the base unit's built-in answering system
has a chance to answer calls and record
messages.
In this case, messages you expect to be
recorded by the answering system will be
recorded on the voicemail service. For more
information, see "For landline voicemail service
subscribers" (page 44).
R When using the base unit or handset to listen to
messages, the noise reduction feature
(page 16) is activated automatically in spite of
the setting ( is not displayed).
Using the base unit
When new messages have been recorded:
– M N on the base unit flashes.
– "New message" is displayed.
Press M N (PLAY).
R During playback, M
R If new messages have been recorded, the base
unit plays back new messages.
R If there are no new messages, the base unit
plays back all messages.
40
TGF35x(en)_1205_ver041.pdf 40
N on the base unit lights.
For assistance, please visit www.panasonic.com/support
Operating the answering system during
playback
Key Operation
MDN or MCN Adjust the speaker volume
M N
Repeat message
M N Skip message
MPAUSEN Pause message
To resume playback, press
M N.
M N (STOP) Stop playback
MERASEN Erase currently playing message
*1 If pressed within the first 5 seconds of a
message, the previous message is played.
Calling back (Caller ID subscribers only)
Lift the corded handset during playback.
R To edit the number before calling back, press
MEDITN repeatedly until the phone number is
shown in the desired format (page 38).
Erasing all messages
Press MERASEN 2 times while the unit is not in use.
Using the handset
When new messages have been recorded, "New
message" is displayed.
1
To listen to new messages:
MMENUN#323
To listen to all messages:
MMENUN#324
2
When finished, press MOFFN.
Note:
R To switch to the receiver, press M
R You can also use the MPLAYN soft key, if
displayed, to play new messages.
Operating the answering system
MMENUN a MbN: "Answering device" a
MSELECTN
Key Operation
MDN or MCN Adjust the receiver/speaker volume
(during playback)
1 or MFN Repeat message (during
*1
playback)
2014/12/05
*1
N.
21:38:32