Table of Contents
Advertisement
The diffuser also softens the light, providing an alternative when no surface is available for bouncing the flash
(see Bouncing Your Flash on page 27).
Using the Autofocus-Assist Light
Camera autofocus systems can have difficulty locking onto a subject in dim light. When the ambient light level
is low, the VS-560N will emit a red autofocus-assist beam when you press your camera's shutter-release
button halfway to autofocus. The camera will then be able to autofocus by locking onto the projected light.
Note that the autofocus-assist light is only available when your camera's autofocus system is set to AF-A or
AF-S. It is not available when AF-C is selected.
|
26
Using the Autofocus-Assist Light
Advertisement
Table of Contents
