Using High-Speed Sync - Bolt VS-560N User Manual

Wireless ttl flash

Table of Contents

Press your camera's shutter-release button to take the picture. The OK indicator will flash on the VS-

560N's LCD, and the OK light below it will glow green momentarily to indicate that the proper exposure

was attained.

Note: The aperture indicator on the VS-560N provides readouts up to f/11, in full-stop increments. The

indicator will display the f-stop closest to your current camera setting.

Using High-Speed Sync

You can use shutter speeds higher than your camera's top flash sync speed with the VS-560N by activating

high-speed sync in automatic TTL mode. High-speed sync lets you use shutter speeds as fast as 1/8000

second. This is especially useful when using large apertures in bright situations or when freezing motion.

Using High-Speed Sync

Table of Contents