Using The Autofocus-Assist Light - Bolt VS-260F User Manual

Using the Autofocus-Assist Light

Camera autofocus systems can have difficulty locking on a subject in dim light. When the ambient light level is
low, the VS-260F will emit a red autofocus-assist beam when you press your camera's shutter-release button
halfway to autofocus. The camera will then be able to autofocus by locking on the projected light.
Note that not all Fuji cameras allow autofocus assist via the flash. Consult your camera's manual for more
information.
|
Using the Autofocus-Assist Light 17