Table of Contents
Advertisement
Handset
Activating/deactivating Auto Answer
When set to Auto Answer, the handset accepts an incoming call as soon as it is removed from the
charging cradle.
¤
. . . use
Change (
= on)
Regardless of the Auto Answer setting, the connection ends as soon as you place the handset
back in the charging cradle. Exception: Press and hold the handsfree key
2 seconds while placing the handset in the charging cradle.
Changing the earpiece and handsfree volume
You can set the volume of the earpiece and speaker at 5 levels independently of each other.
Changes are only saved permanently in Profile Personal.
During a conversation
¤
Handset Volume
Without saving, the setting is automatically saved after around 3 seconds.
In idle status
¤
. . . use
Volume
OK . . . then
For the earpiece:
For the speaker:
Save settings:
Earpiece and handsfree profile
Select a profile for the earpiece and handsfree mode in order to adapt the telephone as much
as possible to the surroundings. Check which is the most comfortable profile for you and your
caller.
¤
. . . use
Acoustic Profiles
select profile
Select (
Earpiece Profiles: High or Low (default setting)
Handsfree Profiles: Profile 1 (default setting) . . . Profile 4
62
to select
Settings
. . . use
to select volume
to select
Settings
¤
Earpiece: . . . use
¤
Speaker
¤
Save
to select
Settings
Earpiece Profiles / Handsfree Profiles
= selected)
OK
Telephony
Save . . . the setting is saved
OK
Audio Settings
to set the volume
. . . use
to set the volume
OK
Audio Settings
OK
Auto Answer
for a further
OK
Handset
OK
OK
. . . use
to
Advertisement
Table of Contents
