Table of Contents
Advertisement
Handset
Setting the date and time
Set the date/time so that the correct date and time can be assigned to incoming calls, and to
enable the alarm to be used.
¤
Press the display key Time
or, if the date and time have already been set:
¤
. . . use
The active cursor position flashes
. . . switch between cursor positions with
Enter date:
¤
. . . using
enter the day, month and year in 8-digit format.
Enter time:
¤
. . . using
enter hours and minutes in 4-digit format.
Save settings:
¤
Press the display key Save. . . . Saved is shown in the display and
a confirmation tone sounds.
Return to idle status:
¤
Press and hold the End call key
The telephone is now ready for use.
Connecting the headset
¤
Connect the headset with 2.5 mm jack to the left side of the
handset
.
1
or
¤
Connect headset via Bluetooth (
The headset volume corresponds with the setting for the receiver
volume (
p. 62).
Connecting the USB data cable
For data exchange between the handset and PC:
¤
Connect the USB data cable with micro-USB plug into the
USB socket at the bottom of the handset
Connect the handset directly to the PC, not via a
USB hub.
12
to select
Settings
. . . change cursor position with
p. 49).
OK
Date/Time
.
1
Calls
Time
OK
Date/Time
Date:
15.08.2018
Time:
00:00
Back
1
1
Save
Advertisement
Table of Contents
