Gigaset SL450A Duo Black Manual page 10

Handset
Setting up the handset for use
The display is protected by a plastic film.
Inserting the battery
Only use a rechargeable battery, as this could otherwise result in significant health
risks and personal injury. For example, the outer casing of the battery could be
destroyed or the battery could explode. The device could also malfunction or be
damaged as a result of using batteries that are not of the recommended type.
2
¤
Insert battery with the contact side pointing
down .
1
¤
Press the battery down until it clicks into
place .
2
Removing the battery
¤
Remove the belt clip (if attached).
¤
Place your fingernail in the notch underneath
the battery cover and pull the battery cover
up .
1
10
1
1
Please remove the protective film!
3
¤
Orientate the battery cover with the
side tabs fitting into the slots on the
inside of the casing
¤
Press the cover until it clicks into place.
¤
To change the battery, place your
fingernail in the recess in the housing
and pull the battery up
.
3
2
.
2