Table of Contents
Advertisement
Electrical Connections
Electrical Connection Entry Point Options
- continued
Alternatively, if preferred, it is possible to route the cable from the
rear bottom right or bottom right positions as shown below by
stripping the sheath back further.
Select the cable inlet option most suited to your situation.
N
L
Rear bottom right
cable entry
Note: Depending on cable size and entry point used it may be
necessary to strip back outer cable sheath sufficiently to allow cables
to be directed to the terminal connection block within the unit.
*
Pipe
Note: When feeding cable through bottom entry
cover
points remove highlighted grey tab on pipe/
blanking cover if using 6mm cable.
Blanking
For 10mm cable remove the pipe/blanking cover
cover
entirely.
Note: We
recommend that
the blue (neutral)
and brown (live)
cables are fed
under the filter
housing. Position
the earth cable
under the outlet
on top of the
filter housing.
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisors.
N
L
*
Bottom right
cable entry
Outlet
Filter housing
cont.
15
Advertisement
Table of Contents
