Advertisement
AFTERCARE INSTRUCTIONS
Your fitting has a high quality finish and should be treated with care to
preserve the visible surfaces. All surface finishes will wear if not
cleaned correctly, the only safe way to clean your mixer is to wipe
with a soft damp cloth. Stains can be removed using washing up
liquid. All bath cleaning powders and liquids will damage the surface
of your fitting, even the non-scratch cleaners.
GUARANTEE
All products are manufactured to the highest standards and a 5 year
guarantee covers any defect in manufacture. As gold and special
effect finishes are softer than chromium plate, special care must be
taken when cleaning; a 3 year guarantee covers these finishes.
NOTE: The 5 year guarantee on the valves is invalidated if damaged
by any w aterborne debris.
In the interests of continuous product development we reserve the
right to alter specification as necessary.
PRODUCT CODE: BL BAS C / BL BID C
TELEPHONE HELP LINE! 01827 311345
Bristan Group Ltd
Birch Coppice Business Park
Dordon
Tamw orth
Staffordshire
B78 1SG
UK
A Masco Company
Web Site:
www.bristan.com
Telephone:
0844 701 6273
Facsimile:
0844 701 6275
Email:
enquire@bristan.com
(FI BL BASBID)
(R3)
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk
Blade
Basin/Bidet Mixer
Fitting Instructions
& Contents List
Please keep these instructions for future reference and request
of replacement part
(U)
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bristan Blade BL BAS C
Summary of Contents for Bristan Blade BL BAS C
- Page 1 In the interests of continuous product development we reserve the Basin/Bidet Mixer right to alter specification as necessary. PRODUCT CODE: BL BAS C / BL BID C TELEPHONE HELP LINE! 01827 311345 Bristan Group Ltd Fitting Instructions Birch Coppice Business Park Dordon & Contents List...
- Page 2 WATER PRESSURE MAINTENANCE This mixer is suitable for use at all supply pressures. However for If the fitting begins to drip: optimum use both the hot and cold supplies should be reasonably Turn off water supplies. balanced. If the fitting is installed at low pressure (tank fed), then the Prise out lever cap (a), loosen grub screw (b) and lift off the minimum distance from the outlet of the nozzle to the underside of the handle (c).
Need help?
Do you have a question about the Blade BL BAS C and is the answer not in the manual?
Questions and answers