Setting The Signal - Siemens WD14H422GB Instruction Manual And Installation Instructions

M

Setting the signal

S e t t i n g t h e s i g n a l
1. Activate setting mode for the signal volume
Turn to $ Off.
2.a Set the volume for the button signals (depending on model)
Touch the Finish in button until the
required volume is reached
2.b Selecting the volume for the information signals
Turn one position clockwise.
Turn one position Press and hold Temp. button +
clockwise. turn one position clockwise.
Go to step 3. or
Touch the Finish in button
until the required volume is
reached.
Setting the signal
Release the button, figure
apperas in the display.
Set to $ Off, switch exits setting mode for
the signal volume.
Set to $ Off, which exits setting
mode for the signal volume.
en
41