Setting The Signal - Siemens WD15H540DN Instruction Manuals

M

Setting the signal

S e t t i n g t h e s i g n a l
1. Activate setting mode for the signal volume
Turn to $ Off.
2.a Set the volume for the button signals
Touch the 0 (Finish in) button until
the required volume is reached
2.b Selecting the volume for the information signals
Turn one position clockwise.
Turn one position Touch and hold the °C (Temperature) but-
clockwise. ton + turn one position clockwise.
Go to step 2.b or
Touch the 0 (Finish in) button
until the required volume is
reached.
Setting the signal
Set to $ Off, which exits setting mode
for the signal volume.
Set to $ Off, which exits set-
ting mode for signal volume.
en
Release the but-
ton, and figure
appears in the
display.
27