Dry; Finish In - Siemens WD14H422GB Instruction Manual And Installation Instructions

Dry

8: The drying function can be
activated, deactivated and set with this
button. Washing and drying without
interruption is possible in automatic
mode only. If the programme for
individual drying is selected, automatic
drying or timed drying with a required
drying duration is available.
Notes
Programme selection in Intensive
■
Dry or Gentle Dry position to select
an individual drying programme.
Overview of programmes
~ Page 34
The standard drying mode is Aut1.
In this mode the drying time is
automatically set according to the
amount of laundry to be dried. The
result is cupboard-dry laundry.
Drying mode can be set to Aut2 in
order to obtain an extra dry result; or
preselect the drying time which can
be specified by selecting the Dry
button.
Cupboard dry (Aut1): For single-
layer fabrics. Garments can be
folded or hung up in a cupboard.
Extra dry (Aut2):For fabrics made of
thick, multilayered items of clothing,
which need to be dried longer.
Garments can be folded or hung up
in a cupboard. Laundry more dry
than Cupboard dry.
Programme selection in washing
■
programmes and if washing and
drying is required without
interruption (only for Rapid 15',
Cottons, Easy-Care, Mixed Fabrics,
Shirts/Business and Textile)
Guards:
Changing programme default settings
Touch button Dry and activate the
1.
function Aut1 or Aut2.
Do not exceed the maximum loads
2.
for drying.
Overview of programmes
~ Page 34
Maximum spin speed for the
3.
washing programme will be selected
automatically to obtain a good
drying result.

Finish in

@: Define the Finish in time (end
of programme).
The respective programme
Note:
duration is displayed by selecting
the programme. The programme
duration is automatically adjusted while
the programme is running if the
programme duration needs to be
changed, e.g. due to changes in the
programme default settings.
Before the programme starts, the end of
the programme can be preselected in
hourly increments up to a maximum of
24h.
When the programme has started,
the preselected time is displayed e.g.
8h and counts down until
the programme starts. Then the
programme duration is displayed,
e.g. 2:30.
When the programme has started,
the preselected time can be changed
as follows:
Touch the Start/Reload button.
1.
Touch the Finish in button
2.
and change the Finish in time.
Touch the Start/Reload button.
3.
en
39