Attaching The Stand (S27Hg50Qq* Model Only) - Samsung S25HG50 User Manual

Attaching the Stand (S27HG50QQ* model only)

― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
1
Place the protective Styrofoam (cushion)
included in the package on the floor
and place the product facing down on
the Styrofoam, as shown in the image.
If Styrofoam is unavailable, use a thick
sitting mat.
Insert the stand neck into the monitor in
the direction shown in the figure.
― Keep the stand base within the platform
to prevent it falling off and causing
injury.
6
Insert the stand base into the stand neck
in the direction shown in the figure.
― Keep the stand base within the platform
to prevent it falling off and causing
injury.
2
Attach the stand neck to the monitor, Attaching the COVER-STAND PIVOT
and then fasten the 4 screws on the base REAR to the stand neck , as shown in the
to tightly fix it. figure.
7
Install the stand base and tighten the Caution
screws at the bottom of the stand base.
Do not press down on the monitor. There
― Keep the stand base within the platform
is a risk of damaging the monitor.
to prevent it falling off and causing
injury.
3 4
Turn the COVER-STAND PIVOT REAR
clockwise to attach it to the rear cover.
5
While pressing down with one hand on
the lower styrofoam layer, lift the stand's
neck with the other hand.
18