Attaching the Stand (S27HG50QQ* model only)
― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
1
Place the protective Styrofoam (cushion) included
in the package on the floor and place the product
facing down on the Styrofoam, as shown in the
image.
Insert the stand base into the stand neck in the
direction shown in the figure.
― Keep the stand base within the platform to prevent
it falling off and causing injury.
2
Install the stand base and tighten the screws at the
bottom of the stand base.
― Keep the stand base within the platform to prevent
it falling off and causing injury.
3
After attaching the stand, place the product in an
upright position.
Caution
Do not press down on the monitor. There is a risk of
damaging the monitor.
18