Gateway NX860 Hardware Reference Manual page 44

CHAPTER 3: Maintaining and Upgrading Your Notebook
40
Remove the old drive from the bracket.
15
Place the new drive, label side up, onto the bracket so the screw holes line
16
up.
Replace the screws that secure the kit bracket to the drive.
17
Slide the new hard drive kit into your notebook.
18
Replace the hard drive bay cover, then tighten the cover screw.
19
Insert the battery, then turn your notebook over.
20
Connect to the optional port replicator.
21
Reconnect the power adapter, modem cable, and network cable (if
22
disconnected in Step
For instructions on installing Windows, your drivers, and your applications,
23
see the Recovering Your System chapter you printed in
7), then turn on your notebook.
www.gateway.com
Step 2.