Gateway NX860 Hardware Reference Manual page 40

CHAPTER 3: Maintaining and Upgrading Your Notebook
36
Insert a straightened paper clip into the DVD drive's manual eject hole,
10
push in the paper clip to eject the drive tray, then pull the drive tray open.
Carefully slide the drive out of the drive bay.
11
Slide the new DVD drive into the drive bay. Make sure that the drive fits
12
securely in the bay.
Turn your notebook over so the bottom is facing up.
13
Secure the DVD drive with the screw removed in
14
Insert the battery, then turn your notebook over.
15
Connect to the optional port replicator.
16
Reconnect the power adapter, modem cable, and network cable (if
17
disconnected in Step 5), then turn on your notebook.
www.gateway.com
Step 8.