Scanned Image Edges Are Cropped; Solving Faxing Problems; Cannot Send Or Receive Faxes - Epson WorkForce WF-7710 User Manual

• Switch to Normal preview mode, if available, and preview your image again.
Parent topic:

Scanned Image Edges are Cropped

If the edges of a scanned image are cropped, make sure your original is placed correctly for scanning. If
necessary, move your original away from the edges of the scanner glass slightly.
If you notice size problems in a copied, scanned, or faxed image, turn off the Original Size Auto
Detection (Glass) setting in the Settings > General Settings > Basic Settings menu. Make sure the
product is out of direct sunlight.
Parent topic:
Related topics
Placing Originals on the Product

Solving Faxing Problems

Check these solutions if you have problems faxing with your product.

Cannot Send or Receive Faxes

Cannot Receive Faxes with a Telephone Connected to Your Product
Fax Memory Full Error Appears
Sent Fax Quality is Poor
Sent Fax is Received in an Incorrect Size
Received Fax Quality is Poor
Received Fax is Not Printed
Parent topic:
Cannot Send or Receive Faxes
If you cannot send or receive faxes, try these solutions:
• If an error code is displayed on the control panel, try the solutions suggested in the error code list.
• If you are faxing from a computer, use the Epson FAX Utility to send your fax.
• Make sure the recipient's fax machine is turned on and working.
• Make sure paper is loaded correctly in your product.
• Make sure you have set up your header information and have not blocked your caller ID. Otherwise,
your faxes might be rejected by the recipient's fax machine.
Solving Scanned Image Quality Problems
Solving Scanned Image Quality Problems
Solving Problems
310