Input Settings - Canon Pixma MG3550 Online Manual

Input Settings

Input Settings allows you to set the following items:
• Select Source
The type of document to be scanned is displayed.
• Paper Size
Select the size of the document to be scanned. This setting is available in whole image
view only.
When you select a size, the Preview area size changes accordingly.
Important
Some applications have a limit to the amount of scan data they can receive. Available
scan range is as follows.
21000 pixels x 30000 pixels or less
If you change Paper Size after previewing, the preview image will be deleted.
Note
If you are not sure which size you should select for Paper Size, set Paper Size to
Full Platen, then measure the size of the document and enter the values into
(Width) and
• Color Mode
Select how to scan the document.
• Color
(Height).
128