Operation Panel - Canon Pixma MG3550 Online Manual

Operation Panel

* The Wi-Fi and Alarm lamps are shown lit in the illustration below for explanatory purposes.
(1) ON lamp
Lights green after flashing when the power is turned on.
Note
ON and Alarm lamps
You can check the status of the machine by the ON and Alarm lamps.
– ON lamp is off: The power is off.
– ON lamp lights green: The machine is ready to print.
– ON lamp flashes green: The machine is getting ready to print, or printing is in progress.
– Alarm lamp flashes orange: An error has occurred and the machine is not ready to print.
"Support Code Corresponding to the Number of Flashes of the Alarm Lamp" in If an Error Occurs
– ON lamp flashes green and Alarm lamp flashes orange alternately: An error that requires contacting the
service center may have occurred.
"Support Code Corresponding to the Number of Alternate Flashes of the ON Lamp and the Alarm Lamp" in If
an Error Occurs
(2) ON button
Turns the power on or off. Before turning on the power, make sure that the document cover is closed.
Turning the Machine On and Off
(3) Wi-Fi lamp
Lights or flashes blue to indicate the wireless LAN status.
Lights:
Wireless LAN connection is enabled.
Flashes:
Printing or scanning over wireless LAN. Also flashes while configuring the wireless LAN connection.
(4) Wi-Fi button
Hold down to automatically set up the wireless LAN connection.
(5) ink lamps
58