Displayport Ver; Hdmi Mode; Source Detection; Key Repeat Time - Samsung C27HG70 User Manual

Gaming monitor
Table of Contents

Advertisement

DisplayPort Ver.

Select your DisplayPort version.
― Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
― If the monitor (when set to HDMI1,
HDMI2
or DisplayPort) is in power saving mode or is displaying the
message
Check Signal Cable
or power saving mode activates, press the JOG button to display the function-
button screen and then select the
button to display the On Screen Display (OSD). You can select 1.1,
1.2↑.
― If setting the
DisplayPort Ver.
to 1.1, for the bandwidth limitation of the DisplayPort 1.1 protocol, the actual
maximum output refreshing rate of the display cards cannot achieve the level of 120 Hz/144 Hz.
― If you select 1.2↑, the monitor can support up to 2560 x 1440 @ 144 Hz and 10-bit color signals.

HDMI Mode

Select the HDMI mode to use.
― The supportable device and resolution may differ depending on its version.
― When the version is changed, the screen may blink.
― If you set the
HDMI Mode
to 1.4, some high resolutions may not be supported because of bandwidth
limitation of the HDMI 1.4 protocol.
― When the setting is not appropriate, a blank screen may appear. In this case, check the specifications of the
device.
― Set the
HDMI Mode
to
1.4
when there is no sound output from the DVD connected to our product.

Source Detection

Select either
Auto
or
Manual
as the method to recognize input signal.

Key Repeat Time

Control the response rate of a button when the button is pressed.
Acceleration,
1
sec, or
2 sec
can be selected. If
when a button is pressed.
1.2
or

Power LED On

Configure the settings to enable or disable the power LED located at the lower part of the product.
Working: The power LED is on when the product is turned on.
Stand-by: The power LED is on when the product is turned off.

Reset All

Return all the settings for the product to the default factory settings.
Game Setting
1,
Game Setting
2, and
No Repeat
is selected, a command responds only once
Game Setting 3
saved under
Save Settings
will not be changed.
40

Advertisement

Table of Contents
loading

This manual is also suitable for:

C32hg70qq seriesC32hg70C27hg70qq seriesLc32hg70qquxen

Table of Contents