Removing The Stand (For Attaching The Bracket Wall) - Samsung C27HG70 User Manual

Removing the Stand (For Attaching the BRACKET WALL)

― Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
1
Place the screen on the Styrofoam or soft cushion
included in the package, hold the stand base with
one hand and remove the screws of the stand base
with another hand.
― Make sure to use the styrofoam (cushion) that came
with the monitor.
5
Unfasten the screws on the stand, as shown in the
image.
2
Remove the stand base.
6
Lift and remove the stand.
3
Turn the COVER-REAR TOP counterclockwise to
detach it from the rear cover.
Caution
Do not press down on the monitor. There is a risk of
damaging the monitor.
4
Remove the COVER-REAR TOP after detaching it
from the rear cover.
20