Installation; What You Will Need - ADDER View Matrix AVM208 Installation And Use Manual

2. Installation

Adder explains:
Flexible configuration
The AdderView MATRIX has many ports for connection to computers, keyboards,
mice and monitors. There are no restrictions placed upon which ports are connected
to devices and you can leave any of the ports disconnected if you wish. You do not
need to connect a keyboard, monitor and mouse to each user port if you do not wish
to use all of these. You may perhaps decide to connect just a keyboard and monitor
or you may decide to connect to just one user port. All of these configurations are
supported. What's more, your devices do not all need to be of the same type. You
may wish to use a large high-resolution monitor with an extended keyboard and a
wheel mouse on one user port and a smaller monitor with a basic mouse and
keyboard on another. The AdderView MATRIX intelligently handles these mixtures
of devices.

2.1 What you will need

For the computer connections you will need:
Cables to connect the AdderView MATRIX to each of your computer keyboard,
video and mouse ports. Cable specifications are given in appendix A. Adder 3-in-1
keyboard / video / mouse combination cables are particularly recommended for
neatness, convenience and video quality. (You do not need to connect a mouse
cable if you are not using the mouse).
A suitable mouse driver for your PCs. Supported types are:
PS/2 or RS232 two button mouse driver (any manufacturer).
-
- Microsoft mouse driver (including IntelliMouse).
- Logitech mouse driver (including two button, three button and wheel mouse).
- General mouse drivers that are supplied with the operating system.
AdderView MATRIX Installation and Use Page 11