Connecting The Adderlink Extender - ADDER View Matrix AVM208 Installation And Use Manual

Type of mouse / system
Connected at bootup
PS/2
PS/2
IntelliMouse / AdderView
IntelliMouse / AdderView
To restore lost mouse movement on a CPU connected to the AdderView:
1) Select the CPU that has lost its mouse movement
2) Activate the on-screen menu using the keyboard hotkeys
3) Press F1 to view additional menus
4) Select the FUNCTIONS menu
5) Select RESTORE STANDARD MOUSE or RESTORE INTELLIMOUSE
6) Exit the on-screen menu
2.10 Connecting an AdderLink Extender
You may connect external AdderLink extenders (i.e. an XR / XL receiver /
transmitter pair) to the AdderView's KVM connectors. If you do this then you should
power the AdderLink XL units using their optional power adapter.
AdderLink requirements
Your AdderLink Extender unit will need to be fitted with firmware version 1.08 or
higher if it is a Gold model or 2.08 or higher if it is a non-Gold model. If you have an
earlier AdderLink unit please contact Adder technical support for advice.
AdderView MATRIX
Driver type
PS/2 only
IntelliMouse
PS/2 only
IntelliMouse
Installation and Use
Likely expected
data format
PS/2
PS/2
PS/2
IntelliMouse
Suggested
restoration
Standard
Standard
Standard
IntelliMouse
Page 22