Table of Contents
Advertisement
2
5
This Wet/Dry vacuum converts to a detachable blower that can be used for leaf blowing in yards,
decks and patios. To use the detachable blower feature follow the instructions listed.
WARNING: ALWAYS WEAR SAFETY GOGGLES COMPLYING WITH ANSI Z87.1 (OR IN
CANADA, CSAZ94.3) BEFORE USING BLOWER.
WARNING: KEEP BYSTANDERS CLEAR FROM BLOWING DEBRIS.
WARNING: WEAR A DUST MASK IF BLOWING CREATES DUST THAT MIGHT BE
INHALED.
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
2. Squeeze the locking lever and lift the detachable blower from the collection tank lid (Fig. 2 & 3).
3. Insert the adapter into the blower port and install the desired blower wand and/or blower
concentrator nozzle (Fig. 4 & 5).
4. Verify that the power switch is in the 'O' OFF position before plugging the power cord into the
outlet. Plug the power cord into the outlet (Fig. 6 & 7).
5. Before turning on the vacuum, firmly hold the blower. Turn the motor on by flipping the switch to
the 'I' ON position (Fig. 8).
6. Once you have completed blowing, flip the power switch to the 'O' OFF position and unplug the
power cord from the outlet (Fig. 9).
BLOWER OPERATION
3
6
4
8
7
2
11
9
Advertisement
Table of Contents
