Table of Contents
Advertisement
Quick Links
E40.0.1X.6C-07
from version 1.0
Please read these instructions carefully before use!
Please consider the safety instructions!
Please keep for future reference!
GHM GROUP - Greisinger
GHM Messtechnik GmbH | Hans-Sachs-Str. 26 | 93128 Regenstauf | GERMANY
Tel.: +49 9402 9383-0 |
Installation and operating manual
Data logger for temperature
EB-Logg 80K...
info@greisinger.de
| www.greisinger.de
WEEE-Reg.-Nr. DE 93889386
Advertisement
Table of Contents
Related Manuals for GHM GREISINGER EB-Logg 80K Series
Summary of Contents for GHM GREISINGER EB-Logg 80K Series
- Page 1 Please read these instructions carefully before use! Please consider the safety instructions! WEEE-Reg.-Nr. DE 93889386 Please keep for future reference! GHM GROUP - Greisinger GHM Messtechnik GmbH | Hans-Sachs-Str. 26 | 93128 Regenstauf | GERMANY Tel.: +49 9402 9383-0 | info@greisinger.de | www.greisinger.de...
-
Page 2: Table Of Contents
Keep this document within easy reach near the device for consulting in case of doubt. © Copyright 2020 GHM Messtechnik GmbH / Standort Greisinger. All Rights Reserved. No part of this documentation may without previous written permission of the company GHM Messtechnik GmbH stored in some form, reproduced, pro- cessed, duplicated or spread become. -
Page 3: Safety
Operating Manual EB-Logg 80K… E40.0.1X.6C-07 page 3 of 14 2. Safety 2.1 Intended Use The loggers EB-Logg 80K and EB-Logg 80KH are especially designed for long-time monitoring of temperatures. The combination of low power consumption with high battery capacity ensure a long record- ing time. -
Page 4: Safety Guidelines
Operating Manual EB-Logg 80K… E40.0.1X.6C-07 page 4 of 14 2.4 Safety guidelines This device has been designed and tested in accordance with the safety regulations for electronic devices. However, its trouble-free operation and reliability cannot be guaranteed unless the standard safety measures and special safety advises given in this manual will be adhered to when using the device. -
Page 5: Product Description
Operating Manual EB-Logg 80K… E40.0.1X.6C-07 page 5 of 14 3. Product description 3.1 Required accessory The logger is configured, started and read-out via the EASYBus-interface. Therefore the following accessories are required: Level converter - RS232 <> EASYBus (i.e. EBW 1, EBW 64, EBW 240) - USB <>... -
Page 6: Display And Control Elements
Operating Manual EB-Logg 80K… E40.0.1X.6C-07 page 6 of 14 4. Display and control elements 4.1 Display Main display Secondary display Display element for max / min Logg: indicates that logger is recording ... -
Page 7: Operation
Operating Manual EB-Logg 80K… E40.0.1X.6C-07 page 7 of 14 6. Operation 6.1 Operating possibilities at the device - display selection Function Procedure Push button shortly The max-value is displayed for 4 seconds. (The max-value display function is signalled by the display ele- Display max value ment “MAX”). -
Page 8: Operating Possibilities Via Software Gsoft 40K
Operating Manual EB-Logg 80K… E40.0.1X.6C-07 page 8 of 14 Push button for about 5 seconds. The main display shows “HoLd”. The secondary display shows “no”. To stop recording select “YES” with the arrow key (button ) and verify with Stop recording Note: If no key is pressed for more than 2 min, the menu is quit without saving. -
Page 9: Operating Displays
Operating Manual EB-Logg 80K… E40.0.1X.6C-07 page 9 of 14 8. Operating displays The logger provides two LCD-displays: 7 mm (main display) and 5.8 mm (secondary display). 8.1 Measured value display The LCD mainly displays the measured values: MEASURED VALUE DISPLAY a) main display: temperature [°C] sec. -
Page 10: System Messages
Operating Manual EB-Logg 80K… E40.0.1X.6C-07 page 10 of 14 8.3 System messages BATTERY • display of the BAT-arrow left hand down: The battery is almost spent and needs to be replaced as soon as possible. The data recording is still active. •... -
Page 11: Specifications
Operating Manual EB-Logg 80K… E40.0.1X.6C-07 page 11 of 14 9. Specifications Measuring range: -30.0 … +60.0 °C EB-Logg 80K -50.0 … 150.0 °C EB-Logg 80KH EB-Logg 80KH…SMB1 -50… 400 °C EB-Logg 80KH…SMB2 -200… 500 °C EB-Logg 80KH…SMB4 -200.0 … 150.0 °C Resolution 0.1 °C or 1°... -
Page 12: Decommissioning, Reshipment And Disposal
Operating Manual EB-Logg 80K… E40.0.1X.6C-07 page 12 of 14 Operating temperature -30 … +60 °C Housing -50 … +200 °C Sensor cable: silicone -50 … +400 °C Sensor cable: glass fiber -200 … +250 °C Sensor cable: teflon -20 … +105 °C Sensor cable: PVC -30 …... -
Page 13: Frequently Asked Questions [Faq]
Operating Manual EB-Logg 80K… E40.0.1X.6C-07 page 13 of 14 11. Frequently asked questions [FAQ] Problem: The logger cannot be stopped via keys. “Logger stop via buttons disabled” has been activated at the configu- Possible reason: ration of the logger. Deactivate this function by means of GSOFT 40K (at tab „settings“). Remedy: Problem: The logger cannot be stopped both via keys and GSOFT 40K. -
Page 14: Device Options
Operating Manual EB-Logg 80K… E40.0.1X.6C-07 page 14 of 14 12. Device options Additional information’s for options of the EB-Logg 80K… . 12.1 AFK, detachable sensor cable For the “AFK” option, the Pt1000 is connected via a 4-pin M8 socket. Please note: Max cable length < 3m 12.2 ALARM With the option „ALARM“...
Need help?
Do you have a question about the GREISINGER EB-Logg 80K Series and is the answer not in the manual?
Questions and answers