Dnid (Data Network Identification); Displaying Dnid; Enabling/Disabling Dnid - Furuno Felcom 15 Operator's Manual

5. DATA REPORTING AND POLLING
5.3

DNID (Data Network Identification)

When you make a contract with an information provider, DNIDs are downloaded
from the information provider to your FELCOM 15, via the appropriate LES.
Up to 64 DNIDs can be downloaded to the FELCOM 15. You can see which
DNIDs are stored as below.
5.3.1

Displaying DNID

It is necessary to contract with an LES to exchange data within a group. The
LES sends a DNID (Data Network Identification) number to each member of the
group. The FELCOM 15 can store 64 DNIDs.
1. Press the [F5] key to display the Reports menu.
2. Press the [3] key to display the Data Network ID list.
Note: Asterisk-marked DNIDs are available for use.
5.3.2

Enabling/Disabling DNID

DNID can be enabled or disabled as follows:
1. Press the [F5] key followed by the [3] key to show the Data Network ID list.
2. Press the [ ] or [ ] key to choose desired DNID from the data network ID list.
3. Press the [Enter] key to enable or disable the DNID as appropriate. An
asterisk appears next to the DNID when it is enabled.
Note: If a DNID is disabled during data reporting, "running data program
4. Press the [Esc] key twice to return to the standby display.
.
5-12
Sub address
Mark '*' means activation. Ctrl+P: Print
No.
Act DNID LES
01
* 00004 101
02
* 00004 101
03
* 23456 101
04
* 03333 101
05
* 03333 101
06
* 07777 101
07
* 09999 101
08
09
10
*
DNID effective
(poll)" is displayed and polling is cancelled.
Member number using DNID
Data Network ID
Subaddr Member Text
000 001
002 003
002 223
002 044
000 044
000 099
000 088
Data network ID list