Connection Of Felcom 15 With Single Pc - Furuno Felcom 15 Operator's Manual

8. E-MAIL BY PC
8.2

Connection of FELCOM 15 with single PC

Received messages are stored in the FELCOM 15. Messages are transmitted by
the PC's e-mail client.
FURUNO
FELCOM 15
Parts required
10BASE-T or 100BASE-T cross cable
PC (with LAN port or LAN card)
Wiring
1. Remove the plate from the LAN port at the rear of the terminal unit.
2. Connect the cross cable between the LAN port on the terminal unit and the
LAN port on the PC.
Settings on FELCOM 15
Default settings are as below. It is not necessary to set IP address and subnet
mask if their default values are used.
IP address:
Subnet mask:
Message size:
Attachment decoding format: UUENCODE**
* Setting may be changed. See paragraph 8.3.5
** Setting may be changed. See paragraph 8.3.6.
Settings on PC
Set network settings on the PC. For details refer to the PC's owner's manual.
Item
IP address
Subnet mask
8-4
LAN port
10BASE-T(100BASE-T)
Cross cable
FELCOM 15 and single PC
172.31.16.1
255.255.0.0
8 KB*
Setting
172.31.16.100
255.255.0.0
PC