Optional Temperature Sensors; Transom Mount Temperature Sensor T-02Mtb - Furuno DFF1 Operator's Manual

1.7

Optional Temperature Sensors

1.7.1

Transom mount temperature sensor T-02MTB

• Fix the cable at a convenient location with cable clamp.
• When the cable is led in through the transom board, make a hole of approx. 17 mm
in diameter to pass the connector. After passing the cable, fill the hole with a seal-
ing compound.
D
D>50cm
M5x20
Temperature sensor T-02MTB
Mount sensor
flush with hull bottom.
11