Connection Of External Equipment; Installing The Dgps Beacon Receiver Kit - Furuno SC-120 Operator's Manual

2. INSTALLATION
2.7

Connection of External Equipment

All external equipment are terminated on the rear panel of the processor unit.
Input: External DGPS Beacon
Receiver in RTCM SC-104 Format
Cable: MJ-A7SPF0003-050 (option)
Output: Log Pulse.
Cable: MJ-A7SPF0003-050
(option)
BEACON
EXT
ANT
Input: Heading Sensor*, Gyrocompass* in
AD-10 Format, NMEA 0183 (IEC 61162)
Doppler Speed Log/Current Indicator
in NMEA0183 (IEC 61162)
Cable: MJ-A6SPF0003-100 (Option)
MJ-A6SPF0007-100 (Option)
MJ-A6SPF0012--050 (Option)
External heading input format and output sentence
AD-10: Header of IEC 61162 data sentence chosen on menu is output.
IEC 61162: When EXT data is output from this equipment, NMEA Header (Identifier) of the
external data is output as it is without changes.
2.8

Installing the DGPS Beacon Receiver Kit

The optional DGPS beacon receiver provides DGPS capability. The beacon
receiver assy. is installed in the processor unit. A DGPS antenna is necessary.
DGPS Beacon Receiver Kit
Type: GR-7001-K
Name
Antenna
Hose Clamp
Spring Washer
DGPS Receiver Assy.
Cable Assy.
PH Connector
Pan Head Screw
DGPS Station List
Whip Antenna
2-22
Output: Plotter, Radar in
Cable: MJ-A6SPF0012-100 (option)
DISPLAY LOG/ALARM HDG IN NAV OUT
1
GPS ANT
2
1 2 3
Processor unit, rear view
Code No. 000-041-738
Type
GR-8 000-040-660
SS7200N 000-570-239
M10 000-864-261
SC-601 004-377-860
TNCBPJ(140) 000-143-748
20-061(7-6P) 004-377-770
M3X8 000-881-404
J49-80010 000-808-435
FAW-1.2 000-130-046
04S4176 000-112-845
NMEA 0183 (IEC 61162)
Output: Radar, Auto Pilot,
Plotter, Scanning Sonar,
Current Indicator in AD-10 Format,
NMEA 0183 (IEC 61162)
Cable: MJ-A6SPF0007-100 (Inst. Mat. 1)
MJ-A6SPF0012-100 (Option)
MJ-A6SPF0003--050 (Option)
12-24 VDC
HDG OUT
1 2 3
4
Output: PC in NMEA 0183 (IEC 61162)
Cable: D-sub 9P
Output: PC in NMEA 0183 (IEC 61162)
Cable: D-sub 9P
Code No. Qty
1
2
1
1
1 w/toothed washer and nut
1
4
1
1.2 m
1
2.6 m
* = The data of external heading must
come from type-approved sensor,
in case of SOLAS vessel.
Remarks