Samsung Multifunction Xpress M207 Series User Manual page 165

Wireless network setup
If below screen appears, press the
within 2 minutes.
When the wireless network set up is completed, click Next.
12
After the installation is finished, click Close.
13
(WPS) button from the control panel
17
Using a network cable
Machines that do not support the network port will not be able to use this
feature (see "Rear view" on page 22).
Your machine is a network compatible machine. To enable your machine to
work with your network, you will need to perform some configuration
procedures.
• After completing the wireless network connection, you need to install a
machine driver to print from an application (see "Installing driver over
the network" on page 140).
• See your network administrator, or the person that set up your wireless
network, for information about your network configuration.
Items to prepare
• Access point
• Network-connected computer
• Software CD that was provided with your machine
• A machine installed with a wireless network interface
• Network cable
2. Using a Network-Connected Machine
165