Samsung Multifunction Xpress M207 Series User Manual page 144

Installing driver over the network
8
Linux
You need to download Linux software packages from the Samsung website to
install the printer software (http://www.samsung.com > find your product >
Support or Downloads).
Install the Linux driver and add network printer
Make sure that the machine is connected to your network and powered
1
on. Also, your machine's IP address should have been set.
2 Copy Unified Linux Driver package to your system.
3 Open Terminal program and go to the folder that you copied the
package to.
4 Extract the package.
5 Move to uld folder.
6 Execute " ./install.sh" command (If you are not logged in as root,
execute the command with "sudo" as "sudo ./install.sh").
Proceed with installation.
7
8 When installation finished, launch Printing utility (Go to System >
Administration > Printing or execute "system-config-printer"
command in Terminal program).
9 Click Add button.
10 Select AppSocket/HP JetDirect and enter your machine's IP address.
Click Forward button and add it to your system.
11
Add a network printer
1 Double-click the Unified Driver Configurator.
Click Add Printer.
2
The Add printer wizard window opens. Click Next.
3
Select Network printer and click the Search button.
4
5 The printer's IP address and model name appears on list field.
6 Select your machine and click Next.
7 Enter the printer description and click Next.
8 After the machine is added, click Finish.
2. Using a Network-Connected Machine
144