Samsung Multifunction Xpress M207 Series User Manual page 141

Installing driver over the network
Command- line Definition
/p"<port name>" Specifies printer port.
or/P"<port name>"
Network Port will
be created by use
of Standard TCP/IP
Port monitor. For
local port, this port
must exist on
system before
being specified by
command.
Description
Printer port name can be
specified as IP address,
hostname, USB local port
name, IEEE1284 port name
or network path.
For example:
• /p"xxx.xxx.xxx.xxx" in
where, "xxx.xxx.xxx.xxx"
means IP address for
network printer. /
p"USB001", /P"LPT1:", /
p"hostname", /
p"\\computer_name\shar
ed_printer" or
"\\xxx.xxx.xxx.xxx\shared
_printer" in where,
"\\computer_name\share
d_printer" or
"\\xxx.xxx.xxx.xxx\shared
_printer" means the
network path to the
printer by entering two
slashes, the computer
name or local IP address
of the PC sharing the
printer, and then the
share name of the printer.
• When installing the driver
silently in Korean, type in-
Setup.exe /s /L"0x0012"
or Setup.exe /s.
Command- line Definition
/a"<dest_path>" or/ Specifies destination path
A"<dest_path>" for installation.
The destination
path should be a
fully qualified path.
/i"<script Specifies customized install
filename>" or/ script file for custom
I"<script filename>" operation.
The script filename
should be a fully
qualified filename.
Description
Since machine drivers
should be installed on the OS
specific location, this
command applies to only
application software.
Customized script file can be
assigned for customized
silent installation. This script
file can be created or
modified through provided
installer customizing utility
or by text editor.
This customized
script file is prior than
default installer
setting in setup
package but not
prior than
command-line
parameters.
2. Using a Network-Connected Machine
141