Table of Contents
Advertisement
Chapter 10
To allow specific device(s):
1 ) Select
Whitelist
2 ) Click
Add
in the
Address
(You can copy and paste the information from the
device is connected to your network).
3 ) Click OK.
Done!
Now you can block or allow specific client devices to access your network (via wired or
wireless) using the
Blacklist
10. 3. IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
network device's IP address to its MAC address. This will prevent ARP Spoofing and
other ARP attacks by denying network access to a device with matching IP address in
the Binding list, but unrecognized MAC address.
I want to:
Prevent ARP spoofing and ARP attacks.
and click Save.
Devices in Whitelist
or Whitelist.
section. Enter the
Network Security
Device Name
and
Online Devices
list if the
MAC
41
Advertisement
Table of Contents
